Tennant IPC PW-E101 Manual De Instrucciones página 8

DESCRIPTION OF SYMBOLS
SWITCHING OF THE PUMP
MOTOR.
DETERGENT
DELIVERY SELECTOR.
Level indicator light.
Temperature indicator light.
SWITCHING ON THE HEA-
TING SYSTEM.
WATER
ADJUSTMENT.
MAINS POWER.
FAULT INDICATOR
CONTROL PANEL
A - On/off switch.
B - Temperature adjustment.
C - Power indicator light.
D - Heating system indicator light.
E - Fault indicator light.
F - Descaler level indicator light.
G - Detergent Solution level indicator light.
H - Temperature indicator light.
USING THE CLEANER
Start the cleaner by turning the selector switch "A"
to pos. "I".
In this position, you can control the water tempera-
ture from minimum to maximum, by using regulator
"B".
Warning
The high pressure water jet generates a reaction for-
ce in the lance. Keep a firm grip on the lance handle.
6
By placing switch "A" on pos. II "Chem", you activate
the supply of the detergent solution.
Use regulator "B" to control the water temperature up
to a maximum of 60°C.
Display:
SOLUTION
If swtich "A" is on pos I, pressure > 32bar, the display
reads "Max 80°C".
Displaying working hours:
By placing switch "A" on pos I and pressing key "+"
one time, you can view the lance opening, number
followed by "#"
By pressing key "+" two times, the display shows
working hours using hot water.
By pressing key "+" three times, the display shows
working hours using cold water.
By pressing key "-" the display shows working hours
using hot water.
TEMPERATURE
By pressing the key "ESC", you exit directly from the
menu and you go back to the preset temperature.
Displaying submenus:
Pressing key "OK" for more than 2 seconds displays
3 submenus. To move forward and backward, press
key "+" and "-" respectively.
1) Lang: It allows you to choose the language in whi-
ch the alarms will be displayed. Pressing key "OK"
will display the preset language. Pressing key "+"
and "-" allows you to select your preferred language.
Confirm language by pressing key "OK".
Press key "ESC" to go back to the main submenu.
2) Qty Chem: It allows you to select the quantity of
detergent solution to use (switch "A" in pos. II". You
can select 4 values comprises between 0.1 and 0.4.
The preset value is 0.2. Select the preferred value
by pressing key "+" and "-". Confirm by pressing key
"OK".
Press key "ESC" to go back to the main submenu.
3) Version: It allows you to view the version of the
software of the electrical bord, which has been in-
stalled.
View the version by pressing key "OK".
Press key "ESC" to go back to the main submenu.
By pressing key "ESC" once more, you go back to
the preset temperature.
Indicator lights:
Indicator light C): Power is on when the indicator
light is on steady (switch "A" in pos. I); when the in-
dicator light is flashing, the high pressure washer is
in "TSI" status.
Led Lights pressure washer running, led in scoring
EN - english
SIGNALS AND FAULTS DISPLAYED