GRE Dream Salt GSS25 Manual De Instalacion Y Uso página 13

EN
7. Timer Mode
Press the "TIMER" key to enter the timer setting interface, the timer indicator is on and the
display panel shows the initial working time which is calculated by the system. Press the "+"
/ "-" key to adjust the working time. To ensure the electrolytic cell service lifetime, the upper
limit of the working time for timer setting is 12 hours.
Press the "MENU" key to save the settings and exit the setting interface. The system will
start the timer mode and start working. The timer indicator is switched off.
If you do not want to set the timer when the system is already in the timer setting status, the
system will go back to the default interface (countdown working interface) after 6s without
operation, or you can press the "TIMER" key again to exit.
Timer setting interface
During the timer resting status, the display panel shows "REST" when pressing the "TIMER"
key, and the system is not allowed to reset the timer function. You need to reset the pool size
to keep working. (See page 6, POOL SIZE SETTING)
9 | Page