Publicidad
Idiomas disponibles
Idiomas disponibles
•
For each side shelf, hold the shelf in the folded position on the side of cart. Screw (1) M6x12 shoulder
screw through the shelf attachment slot and into the upper hole of each side shelf support bracket
(four in total). See figure C & D.
•
Place 3 tool hooks on each side shelf end (6 pieces in total) and tighten the tool hooks with the nuts.
See figure E.
NOTE: To raise the side shelf to an upright position, lift the shelf by holding onto the end of the shelf (front
and back of the shelf). To lower the side shelf, lift the shelf up slightly, then guide the shelf down to the
folded position.
18
Figure B
Figure C
Figure E
Figure E
Figure D
Figure D
Publicidad
