Hazet-Werk 7901 E Instrucciones página 24

Target menu
Target menu
#
Unit
Value
±%
Setting options
# (Setpoint value no.):
Units:
Value:
± % (Tolerance):
Version screen
Design
P/N
S/N
S/W
24
Operating instructions
2
01
Nm
200.0
03
01 – 15
Nm / lbf.ft / etc.
0 or 2 - 100 % capacity
(e.g. 7.0 - 350.0)
1 – 15%
43525
123456
1.1.0
Select menu item
(e.g. units)
Confirm menu item
Modify setting
(e.g. Nm to lbf ft)
Confirm setting
Select
to save and quit
Cancel (exit without
saving changes)
NOTE:
• When changing the setpoint, you can
hold the buttons down to speed up
the change
• If you change the unit, the setpoint
value changes accordingly
• If you set the setpoint value to "0" it is
deactivated, i.e. it cannot be selected
in the measurement screen
Press and hold
screen to display the version screen
The version screen contains:
Design
P/N (part number)
S/N (serial number)
S/W (software version number)
Press to return to the measurement
screen
and press
on the measurement