Costway JB10008 Instrucciones De Montaje página 7

INSTALLATION INSTRUCTION
First: Install pump to the base
Step 1: Install the pump to the base with the 6 black bolts.
Step 2: Place assembled Base & Pump on floor.
Use Allen Wrench to loosen the screws in the crossbar. See the
photo. Insert Foot Bar into the holes of the crossbar. (May require
slightly squeezing ends of Foot Bar towards each other, and some
maneuvering for the bar ends to go into place.)
Step 3: Tighten the 2 set screws to firmly hold the Foot Bar in
place.
Set screw
Foot bar
Pump
Base
6 Black bolts
07