Publicidad
Idiomas disponibles
Idiomas disponibles
ES EN
STEP 7 - First loosen the bolt and nut with a
screwdriver. Then place the handlebar over the front
wheel lever, insert the bolt into the hole and tighten
it with the nut.
STEP 9 - Once the battery is installed, insert the red
terminal of the cable into the positive terminal of the
battery.
5. CLEANING AND MAINTENANCE
- Wipe it regularly with a cloth.
- Rotating parts should be checked regularly to determine if foreign matter is obstructing rotation and to
maintain the state of lubrication in normal operating condition.
6. HOW TO USE THE ELECTRIC MOTORBIKE
The electric scooter is very easy to operate, just push the pedal and it will go forward with a maximum
speed of 3km/h. There is no on/off button.
As soon as the bike starts to roll, the front light will turn on, and it will turn off when the pedal is not pressed.
To turn sideways, simply turn the handlebars slightly in the direction you want to go.
STEP 8 - Loosen the screw on the battery cover with a
screwdriver and open it.
STEP 10 - Close the battery cover and tighten one
screw with a screwdriver.
Electric motorbike
ROMA
10
Publicidad
