Publicidad
Idiomas disponibles
Idiomas disponibles
ES EN
4. ASSEMBLY
STEP 1 - Place the side castors on the lower part of
the body.
STEP 3 - Fit the rear mudguard onto the rear
bodywork, tighten with a screw and screwdriver.
STEP 5 - Insert the front wheel into the hole in the
body, making sure it is in the correct position.
STEP 2 - Tighten the side castors with five screws
using a screwdriver (not included).
STEP 4 - Fit the front mudguard onto the front
bodywork, tighten with four screws and a
screwdriver.
STEP 6 - Connect the handlebar cable plug to the
body cablel plug, then insert the entire plug into
the hole in the body.
Electric motorbike
ROMA
9
Publicidad
