Husqvarna S 138C Manual De Usuario página 7

Disconnect the product
(Fig. 7)
from electrical outlet
before you do
maintenance on the
product. Tines continue
to rotate after the motor
is switched off.
Electrical shock hazard.
(Fig. 8)
Warning: Do not operate
(Fig. 9)
the product across the
power cord as this
can result in electrical
shock or damage to the
product.
This product has
(Fig. 10)
protection against
splashing water.
This product is
(Fig. 11)
in accordance with
applicable EC directives.
This product conforms
(Fig. 12)
to the applicable UK
regulations.
Noise emission to the
(Fig. 13)
environment label as per
EU and UK directives
and regulations, and
New South Wales
legislation "Protection
of the Environment
Operations (Noise
Control) Regulation
2368 - 002 -
2017". The guaranteed
sound power level of the
product is specified in
Technical data on page
16 and on the label.
Double insulation.
(Fig. 14)
(Fig. 18)
Start procedure: loosen
(Fig. 15)
start inhibitor, push
motor brake handle
down.
Release the motor brake
(Fig. 16)
handle to stop.
Scannable code.
(Fig. 17)
Note:
Other symbols/decals on the product refer to
certification requirements for some markets.
Product damage
We are not responsible for damages to our product if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Recycle this
product at a re-
cycling location
for electrical
and electronic
equipment. (Ap-
plies to Europe
only)
7