Oase ProfiLux Garden LED Controller Instrucciones De Uso página 10

Safety information
Electrical connection
• Special regulations apply for electrical installation in outdoor spaces. Only a qualified electri-
cian may perform the electrical installation.
– The qualified electrician has the necessary professional training, knowledge and experience
to perform electrical installation in outdoor spaces. The electrician can detect potential
dangers and knows how to adhere to regional and national standards, regulations and direc-
tives.
– For your own safety, please consult a qualified electrician.
• Only connect the unit if the electrical data of the unit and the power supply match.
• Only plug the unit into a correctly installed outlet. Ensure that the unit is fused for a rated
fault current of max. 30 mA by means of a fault current protection device.
• Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use
(splash-proof).
• Protect open plugs and sockets from moisture.
Safe operation
• Do not use the unit, if electrical lines or the housing are damaged.
• Dispose of the unit if its power connection cable is damaged. The power connection cable can-
not be replaced.
• Do not carry or pull the unit by its power cable.
• Never carry out technical changes to the unit.
• Only carry out work on the unit that is described in this manual.
• Only use original spare parts and accessories.
• Route lines in such a way that they are protected from damage and do not present a tripping
hazard.
• Should problems occur, please contact the authorised customer service or OASE.
Intended use
Only use the product described in this manual as follows:
• As a controller for ProfiLux Garden LED RGB.
• For use in water fountain systems and ponds.
• For use above and under water.
• While adhering to the technical specifications. (→ Technical data)
The following restrictions apply to the unit:
• Do not use in swimming ponds.
• Do not use for commercial or industrial purposes.
10