ARDES AR5BL3 Instrucciones Para El Uso página 18

(EN) Instructions for Use
Place the fan on a flat, dry and stable surface, and insert the plug of
the fan in a socket; the unit will emit a short "BIP" sound and the
"ON/OFF" indicator light will turn on indicating that power is supplied.
For your convenience the unit can be operated by using control panel
in the main body or using remote control included.
Batteries
Remote control is supplied without batteries; before use remote
control open the batteries holder placed on the back of remote control
and insert 2 batteries LR03 1,5V AAA.
To remove batteries, open the batteries holder placed on the back of
the remote control, by sliding the cover to the outwards.
ON/OFF Button (a):
Press On/Off button one time to activate the fan. The unit will start to
operate at lower speed.
Press On/Off button when unit is on to turn it off.
SPEED Button (b):
Press Speed button when unit is on to select the desired air speed.
The selected speed is indicated on the LED display.
SWING Button (c):
Press Swing button when the unit is operating to activate the
automatic left/right oscillation. Press again Swing button to
deactivate the automatic swing.
TIMER button (d):
While the fan is on, press the button to switch off the fan in a range
between 1 and 10 hours from the programming moment.
Each time you press the button, the time increases with 1 hour. The
timer light indicators are turned on, on the display (1h, 2h, 3h, 4h).
The total operating time set before the automatic switching off is
given by the light indicators (for example if all the timer light indicators
are on during the operating time set before the automatic switching
18 / 80