Publicidad
Idiomas disponibles
Idiomas disponibles
4. Place a ccessory tray(A)over h oles (B)onhandle
(viewing from frontofunit). P ush thetree clips (C)into
theholes until t hey sitfiatagainst theaccessory tray.
5. insert m ulti-colored quick connect spray tipsand other
supplied accessories
inspaces provided inaccessory
tray. S ee
How to Use Accessory Tray.
6.
Attach bottle bracket (D) to handle with carriage bolt (E)
and black plastic knob (F). Tighten by hand.
ProjectPro@PerfectlVlix
TM
Soap System
The pressure washer is equipped with a detergent siphoning
hose.
Attach ProjectPro® PerfectiVlix
TM
Siphon to
Pump
Attach the tube end of the blue PerfectiVlix
TM
Siphon (G) to
the barbed tube fitting (H) on the pump.
Attach PerfectMix
TM
DetergentSiphon to
Concentrate Bottle
Place PerfectlVlix
T M
bottle (not included) in the wire-form
bracket on the handle. Removecap from bottle and insert the
PerfectMix
TM
Siphon (J). Screw the siphon unit to the top of
the bottle (!(). Use the clip on the cap (J) to snap siphon to
wire form bracket when siphon is not in a concentrate bottle.
Add Engine Oil
1.
Place pressure washer on a fiat, level surface.
2.
Cleanarea around oil fill and remove oil fill cap/dipstick.
OiL FILLER CAP/DIPSTICK
UPPER
_
LOWER
LiMiT
3.
Using oil funnel (optional), slowly pour contents of
supplied oil into oil fill opening, frequently checking oil
level. DO NOT OVERFILL.
NOTICE
improper treatment of pressure washer could
damage it and shorten its life.
• DO NOT attempt to crank or start the engine before it has been
properly serviced with the recommended oil. This could result in
an engine failure.
4.
Replaceoil fill cap/dipstick and fully tighten.
Publicidad
