ARDES AR5BL1B Instrucciones Para El Uso página 18

convenience the unit can be operated by using control panel in the
main body or using remote control included.
Batteries
Remote control is supplied without batteries; before use remote
control open the batteries holder placed on the back of remote control
(refer to the diagram shown on the back of the remote control) and
insert 1 battery CR2025 3V respecting the indicated polarity.
To remove the battery, refer to the diagram shown on the back of the
remote control.
ON/OFF Button (a):
Press On/Off button one time to activate the fan. The unit will start to
operate and lower speed ("Low" indicator light will illuminate on the
display).
Press On/Off button when unit is on to turn it off.
SPEED Button (b):
Press Speed button when unit is on to select the desired air speed:
low, medium or high. The selected speed is indicated on the LED
display (Low, Mid. and Hi.).
SWING Button (c):
Press Swing button when the unit is operating to activate the
automatic left/right oscillation. The "Swing" indicator light will
illuminate on the control panel. Press again Swing button to
deactivate the automatic swing; "Swing" indicator light will turn off on
the control panel.
TIMER button (d):
While the fan is on, press the button to switch off the fan in a range
between 0,5 and 7,5 hours from the programming moment.
Each time you press the button, the time increases with 0,5 hours.
The timer light indicators are turned on, on the display (0,5h, 1h, 2h,
4h).
The total operating time set before the automatic switching off is
given by the light indicators (for example if all the timer light indicators
are on during the operating time set before the automatic switching
18 / 80