Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Before checking or maintaining the tool, be sure to turn off the tool power switch and remove the battery
pack.
NOTE
This tool is lubricated before it leaves the factory. This lubrication should last for the life of
the tool. No further lubrication is required.
Do not use gasoline, benzene, thinner, alcohol or similar items to clean tools. Otherwise, the tool may
become discolored, deformed or cracked.
NOTE
In order to ensure the safety and reliability of the product, any repair or other maintenance
work must be carried out by the authorized or factory repair service center Be sure to use our company's
replacement parts.
CLEANING
With the motor running, blow dirt and dust out of all air vents with dry air at least once
a week. Wear safety glasses when performing this. Exterior plastic parts may be
cleaned a damp cloth and mild detergent. Although these parts are highly solvent
resistant, NEVER use solvent.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Recommended accessories for use with your tool are available at extra cost from your
local service center.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments should be performed by certified service centers or other qualified
service organizations, always using identical replacement parts.
Before disposing of damaged, check with your state Environmental
Protection Agency to find out about special restrictions on the disposal of
tool or return them to a certified service center for recycling.
1English1
Remove the battery pack from this tool before cleaning solutions.
ACCESSORIES
PROTECTING THE ENVIRONMENT
English
-11
Publicidad
