EQUATION FSE40-23A Manual De Instrucciones página 63

Tilt adjustment
To change air direction upward or downward, loosen the upper tube nut (21) to change the
direction of the engine unit (9), then re-tighten the upper tube nut.
Height adjustment
Loosen the fastening screw(6), to make the stand tube up or down to the desired height,
then lock it to fix the tube.
CARE
• Use a soft, dry cloth to clean the surfaces.
• For persistent stains, use a cloth dampened with soapy water and wipe immediately with a dry cloth.
TROUBLE SHOOTING
Malfunctions are often due to minor causes; please read the table below before contacting the after-sales
service. This can save you time and avoid unnecessary expenses.
Problem
The fan does not turn on
Up
Down
TROUBLE SHOOTING
Possible cause
No voltage in the power supply network
Mode switch does not work
Open in the wiring of the fan
Check for voltage at the outlet, check by a specialist
Contact service, check by a specialist electrician
63
Lock
Solution
EN