Publicidad
CAUTION: This unit is intended for use only with the products and/or maximum
weights indicated. Use with other products and/or products heavier than the
maximum weights indicated may result in instability or cause possible injury.
End Cap
T613060
X 2
That's it ! You've finished assembling your Metal Futon Frame !
Make sure that the
frame with mattress
retainers is always
used as the seat of
the futon. DO NOT
lift this seat frame.
End Cap
T613070
X 2
Weight Limit: 600 Lb / 272 Kg
Helpful Hints
● Move your new furniture carefully, with two people
lifting and carrying the unit to its new location.
● Your furniture can be disassembled and reassembled
to move.
● Clean the product with a soft damp cloth. DO
NOT use harsh chemicals or abrasive cleaners.
● Some parts have been pre-assembled for this item.
They are illustrated on this page and available for
replacement.
●
Check bolts and nuts periodically and tighten if
necessary.
WARNINGS:
Keep hands clear from mechanisms installed
on the arms.
NEVER leave children without supervision on
or beside this furniture.
DO NOT allow children to climb or play on the
unit. Failure to comply could result in severe
injury.
TO AVOID TIPPING, DO NOT SIT, LAY OR STAND
ON THE EDGE OF THE UNIT WHEN THE FUTON
IS IN SLEEPING POSITION.
TO AVOID SEAT TIPPING WHEN FURNITURE IS
ON SEATING POSITION : DO NOT STEP, SIT OR
LEAN ON THE BACKREST.
23
Publicidad
