Descargar Imprimir esta página

CAMP Druid Lanyard Manual De Instrucciones página 51

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
system is not suitable for fall arrest and for this reason it is essential to evaluate the need for a second fall
arrester safety system.
Use lanyard for ventral attachment (
Connect Druid Lanyard to the ventral attachment point of an EN 813 harness with leg loops.
Use lanyard for side attachment (
Connect Druid Lanyard to the two side attachment points of an EN 358 belt. Rope in contact with the anchor must
be protected with tubular webbing [5].
be performed only as shown in
add elements to the connection. It is not necessary to use an energy absorber: the adjustment device [1] absorbs
energy sliding on the rope [2]
the application of a light weight at the bottom of the rope is allowed (< 5 kg). The rope must not have a lateral
kept on the free end [4]
line must be used for the worker's optimum safety. Do not use the device during horizontal/slanted operations in
protected in the event of a fall.
Use as EN 341/2A rescue and evacuation descender
release the brake side rope [4]
careful attention and/or providing a safety loop (
Descent weight m: 40-150 kg
Descent height h: 100 m max
Descent energy W: 7.5 x 10
Operating temperature T:
Descent velocity
Number of descents with minimum mass and maximum height no.
device)
)
)
J max
6
). Use must be carried out by adequately trained personnel
49
which must include the
. Never
O

Publicidad

loading

Productos relacionados para CAMP Druid Lanyard

Este manual también es adecuado para:

3517013517023517010135170201