Publicidad
Idiomas disponibles
Idiomas disponibles
pulley (
).
•
•
moved after use.
For removal:
• Loosen the safety knot.
• Pull the actuating lever [1d] to gradually release the tension in the rope [2] (
• Release the anchoring device.
For connection to the positioning or fall arrest subsystem of the operator:
•
•
tion in relation to the anchoring point and for the authorized fall height.
• The lifeline cannot be used with a retractable fall arrest device.
other dangers that could compromise safety.
Additional locking
In order to avoid the actuating lever [1d]
(
).
Replacement of the rope
the spare parts reported in chart A. Do not use any other type of rope or lanyard. The replacement procedure is
described in
opening screw and washer [1k].
Rescue
Use adequate rescue equipment and provide adequate training for the work crew so that they can quickly rescue
Summary
suitable for use in fall arrest systems for protecting against the risk of falling from heights. Some models are even
of the connectors are highlighted in Tab. K
supplied with the product.
Classes (Tab. K)
Class H: connector for connection using a sailor's knot. Class K: Connector for via ferratas. Class X: oval connector.
51
.
).
Table D for the
-
O
-
Publicidad
