Descargar Imprimir esta página

Sortimo 1800 Instrucciones De Uso página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
Risk of injury due to inadequate carrying
capacity
Roof pillars made of plastic do not have
sufficient carrying capacity. Serious or even
fatal injury can occur if the interior ladder lift is
secured to plastic roof pillars.
▶ The ladder lift should only be secured on
roof pillars with sufficient load-bearing
capacity.
▶ Observe the set-up guidelines of the
vehicle manufacturer.
Requirements for the user
Untrained persons can damage the vehicle
during installation. Please get in touch with
your contact person if any part of the
assembly is unclear.
Scope of delivery
The scope of delivery is illustrated on Page 27.
This symbol indicates whether the
installation material is included in the
delivery.
Technical details
Variable
Weight (empty)
Length
Width
Height
Limitations of use
Variable
Maximum payload
Maximum ladder length
1) A longer ladder can be used if this is hung
from the inner rungs.
© Sortimo International GmbH
Value
8 kg
1790.8 mm
184 mm
250 mm
Value
18 kg
1)
1800 mm
GA 00022 | 2021-07-06 | 5.0
Installation
W A R N I N G
Danger of injury caused by incorrect
torque
If the screw connections are not tightened to
the relevant torque levels, this may lead to
severe to fatal injuries in the event of heavy
braking or an accident.
▶ Comply with the stated torque levels.
This symbol indicates a
mounting in which a specific
torque must be maintained.
Required tools
• Torque wrench 1-25 Nm,
• Hexagon tool head SW 6,
• Deburring tool,
• Battery-powered screwdriver,
• Drill sleeve,
• Setting device for blind rivet nuts,
• Folding rule,
• Pencil.
Required installation materials
The installation materials are shown on
Page 27.
Prerequisites
-
The vehicle manufacturer's set-up
guidelines are available.
-
Vehicle is suitable for the installation.
-
The vehicle is equipped with a restraint
device that complies with the standard for
securing cargo, DIN ISO 27956: 2011.
-
Installation requires two persons.
Installation steps
Step 1: Preparing for installation
▶ Select the required installation position.
▶ Remove dirt and grease from the
installation surfaces.
English
10

Publicidad

loading

Este manual también es adecuado para:

1000004569