Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
ES
UNPACKING THE BOX
After opening the box, remove all parts and compare them with the
following list of included components:
1. Handle
PT
2. Switch
3. Lance extension
EN
4. Gun
5. Nozzle
6. Cleaning pin
7. High pressure hose
FR
8. Water inlet connector
9. Detergent container
10. Fixing plate
Due to transport and packaging, some of the accessories may be
delivered disassembled. Please follow the assembly instructions.
ASSEMBLY
STEP 1
Instruction manual
Screw the pressure washer handle and fixing plate securely to the main
body as shown in the picture below. The screws will be packaged with
the main body; locate and check them when unpacking.
STEP 2
Insert the extension rod (3) into the gun. Push and twist the extension
rod clockwise onto the gun (4) until it is hand-tight to lock it in place.
When the parts are properly joined, the two components cannot be
separated by pulling them apart. All accessories must be inserted into
the gun for proper use.
Align the lug on the top of the nozzle (5) with the lug insert on the top of
the extension rod (3). Push the adjustable fan nozzle towards the end of
the extension rod. A click will be heard when it clicks into place.
STEP 3
Connect the high pressure hose (7) to the water outlet of the pressure
washer. Insert and connect it quickly to avoid leakage. When the parts
are correctly connected, the two components cannot be separated by
pulling directly on the water outlet. Press the "Button" according to
the direction of the arrow, then you can pull out the high pressure hose.
STEP 4
Connect the high pressure hose (7) to the gun (4). Insert and connect
it quickly to avoid leakage. When the parts are correctly connected, the
two components cannot be separated by pulling directly on the gun (4).
Press the gun lock button to remove the hose after use.
20
ref. 08470
Publicidad
