Cutting with 5 measures
You can use the machine to cut without a comb or you can use one of the 4 combs with sizes 1.5, 3, 4.5 and 6 mm.
To adjust the hair size, just select the right comb.
1,5 mm
3 mm
Adjustment of blades and combs
To adjust the blade:
· To adjust the blade,
move the lever from front
to back.
8
4,5 mm
6 mm
For mounting the combs:
· Align the edge of the
comb with the edge
of the blade and push
forward slightly to
assemble.
To dismantle the combs:
· Simply pull the comb
tightly.
Removal and installation of the blades
To remove the blades, press the cutting head down with your thumb as shown in the image below and then
remove the blades. To prevent the blades from falling, use the other hand to hold them.
To install the blades, align the blade (B) with the cutter slot (A) and put it inside. Push the blade
down until it clicks.
9