wad Impulse CW004 Manual De Instrucciones página 6

Conical lever
· The cutting machine is equipped
with an adjustable conical lever that
changes the height of your cut.
· When the lever is in the highest
position, the blades will give the
tightest cut.
· Pushing the lever down gradually
increases the cutting length.
10
Cleaning and maintenance
· The blades are greased and aligned before leaving the factory.
· To clean the machine, follow the previous steps to the removal
of the blades to access the dust and hair accumulation areas.
With the cleaning brush provided, clean these areas and re-insert
the blades properly.
Blade maintenance:
· To keep your clipper in top condition, the blades should be oiled
every few haircuts.
· For proper oiling, the unit must be held so that the blades are in
a downward position. With the machine blade in operation, pour 2
or 3 drops of oil on the upper blade.
11