Publicidad
Idiomas disponibles
Idiomas disponibles
Quality
This function adjusts the overall quality of your photo.
1. Press the up/down keys to select the quality option under settings menu.
2. Press the OK key to enter the sub menu.
3. Press the up/down keys to select: super fine/fine/ common
4. Press the OK key to confirm. The relative icon will be displayed on the LCD screen.
Effects
1. Press the up/down key to select the Effects option under setting menu.
2. Press the OK key to enter the sub menu.
3. Press the up/down keys to select: Common/Black/Old-fashioned/Red/Green/Blue/Sun set/
Warm/Cold.
4. Press the OK key to confirm and save your selection.
Auto shut down
Please Note: The default setting for auto shut down for camera is 3 minutes.
This can be adjusted as follows:
1. Press the up/down key to select the auto shut down option.
2. Press the OK key to enter the auto shut down sub menu.
3. Press the up/down keys to select: 1min/3mins/5mins/Off
4. Press the OK key to confirm and save your selection.
Note: If you choose 'Off', the camera will not auto shut down until the battery runs out of charge.
Sound
1. Press up/down key to select sound option under setting menu.
2. Press the OK key to enter the sound menu.
3. Press the up/down keys to select On/Off.
4. Press the OK key to confirm and save your selction.
Frequency
1. Press he up/down key to select the Frequency option under setting menu.
2. Press the OK key to enter the frequency sub menu.
3. Press the up/down keys to select: 50Hz/60Hz.
4. Press the OK key to confirm and save your selection.
Formatting the memory card
Note: Formatting your memory card deletes all data and files on the card.
Please ensure any files are saved before formatting.
1. Press the up/down keys to select the Format option under the setting menu.
2. Press the OK key to enter the sub menu.
3. Press the up/down keys to select: Yes/Cancel.
4. If you select cancel, press the OK key to confirm. The camera will return to photo mode
5. Alternatively press the OK key to confirm the Format.
Factory default settings
You can restore you cameras settings to the factory default – PLEASE NOTE: all user defined set-
tings will be lost unless they match some of the default settings.
1. Press the up/down keys to select factory default option under settings menu.
2. Press the OK key to enter the sub menu.
3. Press the up/down keys to select factory default or Cancel
4. If you select Cancel, press the OK key to confirm, the camera will revert to photo mode.
5. Alternatively select YES to continue
6. Press the OK key to confirm your selection.
Publicidad
