Bader LEPUS Manual página 7

2
POSITION SETTING
ON/OFF
INTENSITY SETTING
LAMP STRUCTURE
1
4
1 Mount. Allows rotation
2 Handles
3 Sensor ON/OFF
3
4 Switch ON/OFF
OPERATION
Adjust the angle of the handle to the an-
chored position as shown in the picture.
Loosen the screw to adjust the angle and
tighten the screw for normal use.
A
djust the angle and operating distance
of the light by pulling on the handles.
Sensor switch: Slide your hand over the sensor switch to turn the
light on or off. ) sensing distance 0-100mm
Toggle switch: Touch the switch on the handle to turn the light on
and off.
To adjust the intensity, press and hold the lever and the light intensity
will start to change after 1 second. Press and hold until you find the
desired intensity. You will hear a beep when the maximum and mini-
mum intensities are reached.
MANTENAINCE
It is recommended to clean the product every day before each use. To
proceed with the cleaning of the product:
• Make sure that the lamp is unplugged.
• Wipe with a soft, damp cloth.
• Do not use a caustic cleaning solution or a rough cloth to clean
or wipe the front of the light.
• The handle can be sterilised at high temperatures in the auto-
clave.