(D) Beaters
(E) Dough Hooks
(F) Whisk
(G) Storage Box
Note: When inserting tho dough hooks, remember that the rod with the
large washer should be inserted to the right hand slot, and the other one
into the left-hand slot.
Reverse insertion will cause food to roll up and damage the machine.
USING YOUR MIXER
1.Push the beaters into slots, slightly turning until locking into proper
position.
2.Immerse the beaters into products mixture.
3.Plug the mixer into the wall socket.
4.Slide the speed control switch to the desired speed.
5.When the desired consistency is reached, slide the speed control switch
to "0" position. Wait until the beaters stops and unplug mixer.
6.Press beater release button and remove the beaters.
7.To avoid splashing, place the beaters or dough hooks inside the batter
before operating the appliance.
8.Speed "0"is the "OFF"position.
9.NOTE: Set the speed depending on type of food. Always start to work at
low speed, and then gradually increase it. As the mixture during processing
becomes thicker,increase power by switching to a higher speed.
10.CAUTION: When inserting the dough hooks, remember that the rod
with the large washer should be inserted to the right hand slot, and the one
with the small washer into the left-hand slot. This is to avoid the risk of the
ingredients spilling over the rim of the utensils/receptacles.
insert double ear,single ear in right position.Reverse insertion will cause
food to roll up and damage the machine.
SPEED
DESCRIPTION
- 3 -