Publicidad
Idiomas disponibles
Idiomas disponibles
The electric tool was designed for the
following cutter types:
- Profile cutter (Ø 25 mm, R 4 mm)
- Rounding cutter (Ø 22 mm, R 6.3 mm)
- V-notch cutter (Ø 12.7 mm,
- Notch cutter (Ø 12 mm)
- Notch cutter (Ø 6 mm)
- Fillet cutter (Ø 22 mm, R 6.3 mm)
The device is part of the X 12 V TEAM
series from Parkside and can be opera-
ted using batteries of the X 12 V TEAM
series from Parkside. The batteries may
only be charged using chargers of the
X 12 V TEAM series from Parkside.
General description
The illustrations are on the
front and back foldout pages.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Cordless Router
- Suction adapter
- Parallel stop
- Collet chuck 6 mm
- Collet chuck 8 mm (preassembled)
- 6-part cutter set
- Combination wrench
- Case
- Instruction Manual
Battery and charger are not
included.
Overview
90°)
)
Machine:
1 Rechargeable battery
2 Battery release button
3 Upper handle
4 Right handle
5 Drive unit
6 Button for cutting depth rough
adjustment
7 Setting knob for cutting depth
fine adjustment
8 Locking screw
Cutting depth adjustment
9 Baseplate
10 Spindle locking button
11 Cap nut
12 Collet chuck 8 mm, preassembled
(not visible)
13 Recess for suction adapter
14 Parallel stop receptor
15 Retaining screw
16 Cutting depth adjustment locking
knob
17 Battery charge level indicator
18 On/Off switch
Accessories:
19 Combination wrench
20 Collet chuck 6 mm
21 Suction adapter
22 Parallel stop
23 Charger
6-part cutter set:
24 Profile cutter (Ø 25 mm, R 4 mm)
25 Rounding cutter
(Ø 22 mm, R 6.3 mm)
26 V-notch cutter (Ø 12.7 mm,
27 Notch cutter (Ø 12 mm)
28 Notch cutter (Ø 6 mm)
29 Fillet cutter (Ø 22 mm, R 6.3 mm)
GB
MT
90°)
)
25
Publicidad
