Publicidad
Idiomas disponibles
Idiomas disponibles
ink
the solution
tank
by lifting it straight
from the lower body.
black cap at the bottom
of the
hnk.
th hot (not boiling)
tap water
IVlAX) to the WATER line. Fill the
Lhe tank with BISSELL 2X Formula
to the
JLA line. Replace and tighten
the black cap.
Do not microwave
or boil water
filling.
_ce solution
tank on lower body.
11
3.
2.
41
into proper
outlet.
Adjust
the retractable
handle by turning
)unterclockwise
and lifting the handle up.
clockwise
to secure.
3. With foot, press the red power
button,
located
on the back of the machine.
NOTE: Handle must be in the full upright
position before cleaning.
4. With foot,
press the grey recline
lever.
located
next to power button.
5. Cleaning Strokes. While pressing the
trigger, make one slow forward
wet pass and
another one back. Caution:
Do not overwet.
6. Release the trigger
and make one slow
forward
and backward
pass over the same
area.
7. Repeat steps 5 and 6 until solution
being
pulled up appears
clean.
8. Empty the collection
tank when dirty
water
reaches the full line, or when the solution
tank
is empty.
31
41
Recline
Empty
the collection
tank
1. With foot, press the red power
button,
to turn
off and unplug
power cord from outlet.
2. Remove the collection
tank from base of unit.
a. Release collection
tank latches (on each
side) by pulling
up from the bottom
of latch
and then out.
b. Carefully
remove tank by lifting
up on the
ink handle.
collection
tank to a toilet or sink. To
out contents
using opening
at back
2a.
tank thoroughly
and replace
continue
cleaning.
Power
Publicidad
