Bissell READYCLEAN 47B2 Serie Guia Del Usuario página 9

. . ele(tri(aln, P0u_e_Se_i_ np '
I/off anddis(0nne(t p lugfrom
Problem Possible causes Remedies
Solution tank empty Refill tank with water and formi
Lint screen on solution tank cap Soak solution tank cap in warm
clogged and then rinse under running waX:
Reduced
spray OR Spray Nozzle Clogged Clean Spray nozzle by rinsing
no spray under water
Upper handle is not in the upright Rotate the retractable handle lock, i:
and locked position pull handle up and return the handl i
lock to the locked position.
Collection tank not aligned/ Check tank alignment and secure
secured with side latches ,
i
Collection tank full Empty tank
Deep cleaner Removable nozzle installed Unplug unit. Align two "hooks" into
not picking improperly bottom first, then snap into place on
up cleaning " top
solution Removable nozzle full of debris Unplug unit. Remove nozzle and
Red lint screen under collection Remove debris from lint screen
................... _ tank clogged
Please do
not return
this product
to the store.
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
For any questions or concerns, BISSELL is
be of service. Contact us directly at
www.BISSELL._