Publicidad
Idiomas disponibles
Idiomas disponibles
08 - OPERATION
When turning on, the equipment must emit 3 short beeps on the buzzer and LED. If it emits 2 long beeps, there is a
communication problem with the Mifare RF circuit and specialized support should be sought.
After this indication, the equipment is already in operation, keeping the LED fixed in blue.
If the equipment is connected to a WeGo Converter, the LED on the equipment will dim, alternating between on and
off, simulating "breathing".
All menus and values can be changed in any operating mode, but some commands and times are only functional in
certain modes (slave mode or controller mode).
09 - ENROLLMENT / REMOVAL OF USERS
Pass the
card
"MASTER"
to start
NOTES: If the "USER" card presented is not enrolled, the reader will include it in the memory and notify with 2 short
beeps and the LED in purple color. However, if the "USER" card presented is already enrolled, the reader will delete
it from the memory and notify with 3 short beeps and the LED in purple color.
10 - ACESS THE OTHER MENUS
MAIN MENU
(FUNCTIONS)
Swipe the
LED
card
flashes
"MASTER"
1 flash -
Enrollment /
removal of
users
2 flashes - Relay time
setting for WeGo
Converter
3 flashes - Door sen-
Blue
sor time setting for
WeGo Converter
4 flashes - Wiegand
output setting for cards
5 flashes - Buzzer
setup
Swipe the "MAS-
TER" card after 1
flash on the LED
to access the en-
rollment menu
The
Blue LED and
1 beep will be
emitted
Choose
the function (accord-
ing to the LED flash-
ing)
The LED will
toggle between
green and red
(FUNCTION VALUES)
Choose the value of the
Swipe the
LED
card
flashes
"MASTER"
1 flash - 1 second
2 flashes - 5 seconds
Yellow
3 flashes - 10 seconds
4 flashes - 30 seconds
5 flashes - 60 seconds
1 flash - Off
2 flashes - 5 seconds
3 flashes - 10 seconds
Yellow
4 flashes - 30 seconds
5 flashes - 60 seconds
1 flash - Wiegand 34-bit
Yellow
2 flashes - Wiegand 26-bit
1 flash - Buzzer on
Yellow
2 flashes - Buzzer off
ENGLISH
Swipe the card
"USER", key-
chain or
Midate Nice tag
If the purple LED
turns on and 2 short
beeps are emitted
indicating enrollment
or 3 short beeps indi-
cating removal
of the user
SUB MENU
function
(according to the
LED flashing)
See previous table of contents
(ENROLLMENT / REMOVAL OF USERS)
Swipe the
LED
card
flashes
"MASTER"
Green
(exits
menu)
Green
(exits
menu)
Green
(exits
menu)
Green
(exits
menu)
25
Publicidad
