STEP 4 Leveling the refrigerator
Adjusting the front height
CAUTION
• When installed, the refrigerator must be leveled on a flat, solid floor. Not leveling the
refrigerator can cause damage to the refrigerator or physical injury.
• Leveling must be performed with the refrigerator empty. Make sure no food items are
inside the refrigerator.
• For safety reasons, adjust the front a little higher than the rear.
Level the refrigerator using the special screws (levellers) on the front legs. Use a flat-head
screwdriver to turn the levellers.
Adjusting the rear side height (applicable models only)
Insert a flat-head screwdriver into the
leveler of the front left or right leg. Turn
the leveler clockwise to raise or turn it
counterclockwise to lower.
If you need to raise the rear side of the
refrigerator to level it, you can use the
provided level adjustment pad(s). Follow
these instructions to raise the rear side of
the refrigerator.
English 33