asalvo baby 14900 Manual De Instrucciones página 13

1. ASSEMBLING THE ARMREST
Noting the armrest marked with (L/R)to pre-
vent them bein gassembled the wrong way.
Following the Fig R, press the right armrest to
fix it on the seat,repeat the same process with
the left armrest(Fig .L).
Once the assembly is completed,push the ar-
mrest to check if it is locked on the seat firmly(-
Fig R-L).
2. ASSEMBLING THE BACKEST
EN
Depress the backrest handle , Follow the Fig 1,
then insert it in low angle like the Fig 1a.till it
insert the slot,you will hear "Click"(Fig1b).Make
sure it had been fixed firmly.
The backrest has 3-position adjustments.
3.ASSEMBLING THE LEG
CAUTION: The left and right leg have a different
shape to prevent them being assembled the
wrong way around.
Press the open / close button on the Legs and
expand the legs until you hear a click to indicate
that they are locked in an open position (Fig.2a).
Repeat the same process with the other leg.
Leaving the open / close button facing ou-
twards, insert the front leg into the left seat ad-
justment hinge (L-L), as shown in figure 2.
Repeat this process with the other leg (R-R).
Once assembly is complete, lift the seat
upwards until it locks in one of the 7 possible
positions. Check that the seat is locked in the
same position on each leg .