asalvo baby 14900 Manual De Instrucciones página 14

4. ASSEMBLING THE FEET
Turn the highchair upside down.Please
note that each of the four legs has a sprung
loaded pin.
Line up one of the feet so that the small hole
in the top of the foot lines up with the pin.
Push firmly on the foot at either end until
each of the two sprung pins click into place
within the small hole in the foot, repeat for
other foot.
EN
5. ASSEMBLING THE SEAT COVER
Slide the pocket of the seat cover back over
the curved backrest(Fig 4a)
Follow the Fig 4, to assemble the snap bu-
tton at 2 sides of the inner side of armrest,
then press the button on the seat cover to fix
them together.
6. ASSEMBLY THE TRAY
There are six screws need to be fixed into
the main tray.Please follow the fig(5), fix the
screw clickwise into the main tray. please be
careful not to over-tighten.