LEBENLANG LBE2662 Manual Del Usuario página 15

4. After reaching the desired temperature the water kettle
will keep the desired temperature at this level for two
hours. The power knob blinks in red color.
5. To stop the keep warm function simply press the power
knob again or unplug the water kettle or lift he kettle
from the base.
Cleaning
● Always remove the plug from the mains supply before
cleaning the kettle. The exterior of the kettle should be
cleaned, If necessary, with a slightly damp cloth without
additives.
● After multiple uses limescale deposits are naturally formed
and can be found in the water kettle and reduce the heating
efficiency.
● The amount of limescale deposits largely depends on the
water hardness in your area and the frequency with which the
kettle is used.
● Boiled scale is not harmful to your health. But if poured
into your beverage it can give a powdery taste to the drink.
Therefore, the kettle should be descaled from time to time (at
least twice a year):
1. Fill the kettle up to "max" with a mixture of one part
ordinary vinegar and two parts water. switch on and wait
for the appliance to switch off automatically.
2. Let the mixture remain inside the kettle overnight.
3. Discard the mixture the next morning.
4. Fill the kettle with clean water up to "max" mark and boil
again.
5. Discard the boiled water to remove any remaining
limescale and vinegar.
6. Rinse the inside of the kettle with clean water.
● The limescale filter can be removed for cleaning. The filter
should be cleaned regularly to prevent clogging
● Warning: Never remove the filter when the kettle is full of hot
water.
15