Wireless Pet Water Fountain Pro
Specifications
Product Name: PAWAii Wireless Pet Water Fountain Pro
Product Model: PWF03W-W/PWF03W-R
Filter Model: PWF03FU
Product Weight: 2.65 lb/1200g
Charging Time: 3-4h (5V/2A)
Product Dimensions: 10.5*5.7*7.2 inches/266*145*182 mm
Operating Mode: Plug-in/Battery-operated
Product Main Parts Description
External Water Pump
External Water Pump
Filter Tube
Base
UV Lamp
Factory Reset Key
Parts List
TYPE-C Charging Cable
No Adapter
, Manual
(
)
Battery Capacity: 5000 mAh
Nominal Voltage/Current: 5V , 2A
Rated Power: 1.2W
Water Tank Capacity: 2L/8 cups
External Water Pump Key/Indicator
Infrared Induction Unit
Water Tray
Water Tank
NSF-certified Filter
Network Configuration Key/
Base Indicator
External Water Pump
Charging Port
Base Charging Port
1
Installation Instructions
5
min
Step 1: Remove the filter and tear off the
heat shrinkage film on its surface. Soak the
filter in a clean bowl of water for 5 minutes.
3
1
2
Step 3: Assemble the soaked filter with the
water tray and place them on the water
tank. Install the external water pump onto
the water tank.
Note: To ensure the accuracy of the weighing data, please do not place the device on soft ground.
2L
Step 2: After cleaning the water tank
and tray, put the tank on the base and
add 2L of fresh water.
Step 4: Hold the on-off key for 3 seconds to
turn on the device. It is recommended that
the device be fully charged or plugged in
before using it.
2