PURLINE VENTY APOLLO Manual De Instrucciones página 12

EN
INSTALLATION
STEP 1
Open the packing case, take out the circulating fan body, column, and base, and
check whether the parts in the packing case are consistent with the packing list
in the instructions.
STEP 2
Connect the base to the column: Screw the threaded end at the bottom of the
column into the base first. (as shown in step 1 on the right)
The body is mounted on the column: put the bottom end of the body with a
threaded end Screw in the column and tighten it to install it in place (as shown
in step 2 on the right)
STEP 3
The device is installed
Note: Screw thread must be tightened during installation.
12
Installation method