PURLINE VENTY APOLLO Manual De Instrucciones página 13

OPERATION
ON/OFF
While in stand-by mode, press ON/OFF Button to change to working status and
vice versa.
Pushing the power button when in operation will put it in stand-by mode.
Turning on the machine for the first time will put it in low speed mode and default
mode, it will be indicated by the light. (It will be first be put at MED speed, after
3 seconds of operating it will switch to low speed, at a default settings without
oscillation)
When connected to a power source the fan will be switched on from the previous
setting. It will start at MED speed and switch to previous setting after 3 seconds.
Natural Breeze mode, Sleep mode and timer function are not included.
SPEED The wind speed of the fan can be adjusted with this button. The key presses will
be in rotation of low>med>high.
TIMER
The TIME button has 12 timer settings in the order of 1H > 2H >3H >4H .....>Off, it
will be displayed accordingly on the LED light display, time will not accumulate.
Selecting the relative settings will start the timer, once the timer runs out the
machine will automatically turn off.
When reset the timer, the fan will work according to the latest setting.
Timer can be preset in stand-by mode, presets can be set to: 1H, 2H, 3H....12H. LED
light will be displayed correspondingly, time will not accumulate.
SWING
Press Swing buton,the machine will swing for left and righht.
EN
13