Stopping The Hedge Trimmer; Starting The Hedge Trimmer - Oregon HT250 Manual De Instrucciones

OPERATING THE HEDGE TRIMMER
STANCE
Stand with both feet on solid ground,
with weight evenly spread between them
Do not overreach and do not stand on a
ladder, stepstool, or any raised position
that is not fully secured
Hold the hedge trimmer as close as
possible to the body to maintain control
(Fig 14)
FIG. 14
16
OREGON® Cordless Tool System
HEDGE TRIMMER MODEL HT250

STOPPING THE HEDGE TRIMMER

Release the throttle trigger to stop the
hedge trimmer

STARTING THE HEDGE TRIMMER

Grasp the front and rear handles firmly
Squeeze the throttle trigger (1) until the
cutting blades move at the desired speed
(Fig 15) The hedge trimmer will not start
unless the trigger lock-out (2) is activated
To activate trigger lock-out, pull back
with thumb
FIG. 15
(1) THROTTLE TRIGGER
(2) TRIGGER LOCK-OUT
CONTROLLING CUTTING BLADE
SPEED
The throttle trigger controls the speed
at which the cutting blades oscillate
Squeeze the throttle trigger more firmly
for faster cutting speed
Use the lowest pressure required to cut
the material This helps to maximize
the amount of cutting time per battery
charge and reduces the number of
charging operations required
AF 0513 - F/N 558935