Blyss DH2U-500 Manual página 8

SELECTING COMFORT MODE
SETTING THE COMFORT MODE TEMPERATURE
- The right button sets the Comfort mode temperature from 15°C to approx-
imately 30°C.
What you need to do :
- Set the button in the middle : the red light comes on when
the set temperature is higher than the room temperature.
- If the room temperature exceeds the desired temperature,
reduce the temperature setting until the red light goes out.
- If the room temperature does not reach the desired temper-
ature, increase the temperature setting.
- Wait at least one hour for the room temperature to stabilise
before adjusting the temperature setting again.
- When the temperature is right for you, set the temperature
position once and for all.
Note : the room temperature depends on the temperature
setting as well as on the size and insulation of the room.
SELECTING FROST PROTECTION MODE
- Select a consistent frost-protection temperature of approx-
imately 7°C (button turned fully to the left).
The mode selection button must not be in the OFF position.
The heating LED flashes rapidly at regular intervals.
- The appliance is continually in Comfort mode.
8
Quick start