Publicidad
Idiomas disponibles
Idiomas disponibles
18. DISPLAYED MESSAGES
DISPLAYED MESSAGE
FILL TANK WITH FRESH
WATER
INSERT WATER TANK
EMPTY GROUNDS CONTAINER The grounds container (A11) is full.
INSERT GROUNDS CONTAINER After cleaning, the grounds container (A11) has
ADD GROUND COFFEE MAX.
ONE MEASURE
POSSIBLE CAUSE
Insufficient water in the tank (A17).
The tank (A17) is not inserted or is inserted
incorrectly.
not been replaced.
Preparation with pre-ground coffee has been
selected.
REMEDY
Fill the tank with water and/or insert it cor-
rectly, pushing it as far as it will go until it
clicks into place.
Reposition the tank correctly and press fully
home.
Empty the grounds container and drip tray
(A15) then clean and return them to the
machine. Important: when removing the
drip tray, the grounds container must always
be emptied, however little it may have been
filled. If this is not done, it can happen that
the grounds container will fill up more than
expected when further coffees are prepared,
causing the machine to clog.
Remove the drip tray (A15) and insert the
grounds container.
Make sure the funnel (A4) is not blocked, then
add one level measure (D2) of pre-ground
coffee, press "OK" on the display and follow
the instructions in section "7.4 Making coffee
using pre-ground coffee".
23
Publicidad
