GB
SETTING THE GRINDING TIMES (see Fig. 7 and Fig. 8)
Note: Due to the shape and design of the burrs, for the first use only, a short run-in period of
grinding coffee beans is necessary to obtain a consistent weight of the dose.
Note: The minimum settable time is 0,30 second and the maximum time is 60,00 seconds for all
shots.
To change the grinding time of any shot (single, double or extra), proceed as follows (the procedure
is the same for all types of shot).
From the main page, press for three seconds on the desired shot. The display shows the relative
grinding time modification page (see Fig. 7).
Press on the units or hundredths of the time you want to change.
Increase or decrease the value with the buttons
by 5 at a time.
To increase or decrease faster, hold down the respective buttons.
Confirm the changes with
The display returns to the main page.
To exit without making any changes, press
Changing the grinding times from page 1/3 of the menu
Access the double dose page for example (see Fig. 8).
Press on the units or hundredths of the time you want to change.
Increase or decrease the value with the buttons
by 5 at a time.
To increase or decrease faster, hold down the respective buttons.
Confirm the changes with
The display returns to page 1/3 of the menu.
To exit without making any changes, press
Quick modification of the grinding times
.
.
and
.
and
or
.
, only for cents this changes
, only for cents this changes
41