Techmade TM-046 Serie Manual De Usuario página 10

Configuration 1
This configuration will allow you to connect wireless headphones to a
smartphone or tablet.
1. Turn on the headphones by pressing the " " button for two seconds.
2. Connect the device to the headphones, searching for the name "TM-046'".
The LED indicator (which will flash blue for a few seconds) and a sound will
notify you of the completed association.
Configuration 2 (AUDIO ONLY)
This configuration will allow you to connect the wireless headphones to a
device via AUX cable.
1. Connect the wireless headphones with the AUX to AUX cable to any device
equipped with an AUX port.
Headphone instructions
- Press the " " button for two seconds to turn on / off the headphones.
- To change mode, press the " " button until the required mode is reached.
- FM RADIO mode: Briefly press the " " button to start an automatic
station search (this may take a few minutes). During the search phase, the
LED light will flash blue. When finished, the stations will be saved automatical-
ly. To switch from one station to another, press the "+" or "-" button.
To raise / lower the volume, long press on "+" or "-".
- In SD CARD and wireless mode, to go to the next track press "+". To return
to the previous track, press the "-" button. To raise / lower the volume, long
press on "+" or "-". Press the " " button to play or pause.
- CALL mode: Press the button "
" to answer a call. Press it a second time
to hang up the call.
Press and hold the " " button to reject a call without having answered.
Press the " " button twice to redial and call the last number.
- Charging: The LED light will turn red during charging and will stop flashing
when the headset is charged again.