Perel Tools WELD-101 Manual Del Usuario página 3

6. Important
Do not pull the rubber hose if connected to the gas cylinder. Verify the
condition of the hose before use. Replace it if damaged, cut or
overheated. The hose must be changed within the expiring date printed
on the hose.
7. Technical specification
dimensions
connecting neck
rubber hose
burner
gas consumption (@ outlet pressure of 4 bar)
power (@ outlet pressure of 4 bar)
Velleman nv cannot be held responsible in the event of damage
or injury resulted from (incorrect) use of this device. For more
info concerning this product, please visit our website
www.perel.eu. The information in this manual is subject to
change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned
by Velleman Components nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any
electronic medium or otherwise without the prior written consent of the
copyright holder.
Ø 50mm
3/8 x 1.5m
Ø 17mm (injector
0.24mm)
195g/h
2.75kW