Publicidad
3. Product details
4. Initial use
Take the device and the accessories out of the package and remove all
packaging material. Connect the USB cable to a free USB port of your
computer. The driver is installed automatically. The device is now ready
to be used.
5. Scanning angle
To ensure correct scanning, make sure that the scanner is not held at
a 90° angle to the barcode. The scanner has to be pointed towards the
barcode and the laser should cover the entire barcode. If this is not the
case, errors might occur.
6. Advanced settings
You can use the advanced settings for additional settings such as enabling
or disabling certain types of code. Scan the following barcodes to configure
the scanner.
Note: Do this only if you are familiar with the product and have the neces-
sary technical "know-how".
To cancel the settings, reset the device to factory settings.
English
Sensor unit
Trigger
27
Publicidad
