Replacing/Cleaning The Spark Arrester Screen - Dolmar PC-6412 HappyStart Manual De Instrucciones Y De Seguridad

13
A
B
24
14
16
15
Put the guard plate (13) on.
Screw on nuts (14) and tighten by hand.
To tighten the V-belt see "Tightening the V-belt / Checking
V-belt tension".
Tighten the nuts (14) firmly with the combination wrench.
IMPORTANT:
When you reposition the cutting attachment, the direction
of rotation of the cutting wheel changes.
Diamond cutting wheels must be installed in the proper
direction of rotation!

Replacing/cleaning the spark arrester screen

The spark arrester screen should be checked and cleaned
regularly.
Loosen the 2 screws (15) and remove the spark arrester
screen (16).
Reassembly the spark arrester screen and tighten the screws.
CAUTION:
Do not use sharp or pointed objects for screen cleaning.
Damaged or misformed screen wires may result.