Ibiza Light LC192DMX-MINI Manual De Instrucciones página 8

3. Press the SCENE button that corresponds to the scene to be copied
4. Press the MIDI/ADD button to copy the scene
5. Use BANK UP/DOWN buttons to navigate to the bank that the Scene is to be copied into
6. Press the SCENE button where the Scene is to be copied into. All LEDs will blink to confirm
3.5.3 Delete a Scene
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Use BANK UP/DOWN buttons to navigate to the bank containing the Scene to be deleted
3. Press and hold the AUTO/DEL button
4. Press the SCENE button that corresponds to the scene to be deleted. All LEDs will blink to confirm
Note: When deleting a scene, the physical location is not removed. However, all 192 DMX channels available to the scene will be set to
value 0.
3.5.4 Delete All Scenes
Action:
1. Press and hold the PROGRAM and BANK DOWN buttons whilst switching the power off
2. Turn the FIXTURE back on and all Scenes will be deleted
Caution: This process is irreversible. All scenes with data will be set to 0.
Playback
3.6
3.6.1 Running in Sound mode
Action:
1. Press and hold the MUSIC BANK COPY button until the MUSIC LED is lit
2. Use BANK UP/DOWN buttons to navigate to the bank which is to be run in Sound mode
3. Alternatively, you can press a single CHASE button or several CHASE buttons in sequence and all Chases will be run in the
order selected
4. You can adjust duration time using the FADE TIME fader
Note: In Sound mode, programs will be triggered by the sound using its built-in microphone.
Multiple chases selected will loop and run in the order originally selected.
3.6.2 Running in Auto mode
Action:
1. Press and hold the AUTO/DEL button until the AUTO LED is lit
2. If no CHASE button is pressed, the FIXTURE will automatically run a BANK program
3. Use BANK UP/DOWN buttons to navigate to the bank which is to be run in Auto mode
4. Alternatively, you can press a single CHASE button or several CHASE buttons in sequence and all Chases will be run in the
selected sequence.
5. You can adjust time between steps using the SPEED fader and duration of the step using the FADE TIME fader
3.6.3 Blackout
Action:
1. Press the BLACKOUT button to set all DMX values temporarily to 0.
APPENDIX
4.1 Introduction to DMX
There are 512 channels in a DMX-512 connection. Channels may be assigned in any manner. A fixture capable of receiving DMX 512
will require one or a number of sequential channels. The user must assign a starting address to the fixture that indicates the first
channel reserved in the controller. There are many different types of DMX controllable fixtures and they all may vary in the total
number of channels required. Choosing a start address should be planned in advance. Channels should never overlap. If they do, this
will result in erratic operation of the fixtures whose starting address is set incorrectly. You can however, control multiple fixtures of the
same type using the same starting address as long as the intended result is that of unison movement or operation. In other words, the
fixtures will be slaved together and all respond exactly the same.
©Copyright LOTRONIC 2018 LC192DMX-MINI 8