Publicidad
Idiomas disponibles
Idiomas disponibles
Value
d_1
Monday
d_2
Tuesday
d_3
Wednesday
d_4
Thursday
d_5
Friday
d_6
Saturday
d_7
Sunday
Level: U=user menu - I=installer menu
Weekly programming allows you to define 6 distinct operating
time bands for each day of the week.
Value
d1A
Time slot 1
d1b
Time slot 2
d1c
Time slot 3
d1d
Time slot 4
d1E
Time slot 5
d1F
Time slot 6
Level: U=user menu - I=installer menu
For each band it is possible to define the operating mode (stan-
dard or silenced), the set point, the start and end time and, in
the case of a cascade of water heaters.
For example: by accessing the "d1A" menu, by pressing the
"SET"
key and scrolling with the "+" and "-" keys, the values
from "1A1" to "1A9" will appear.
Value
Description
default min
Enabling/Disa-
1A1
0
0
bling time band 1
1A2
Band 1 start time
00
00
1A3
Time slot 1 starts
00
00
1A4
Band 1 end time
00
00
Band 1 end
1A5
00
00
minutes
Band 1 operating
1A6
2
2
mode
1A7
Band 1 setpoint
50
38
Enabling/Disa-
1A8
bling Silent mode
0
0
in band 1
1A9
Unsable
-
-
Level: U=user menu - I=installer menu
By pressing the "SET"
modified, its value can be modified using the "+" and "-" keys.
Then press the "SET"
will confirm the modification) or the "ON/OFF"
the menu.
EN
126
Description
Description
Unit of
max
mea-
Note
sure
1
-
(0=disabled, 1=enabled)
23
ora
00:23
45
min
00, 15, 30, 45
23
ora
00:23
45
min
00, 15, 30, 45
2:5= (2=ECO, 3=AUTO,
5
-
4=BOOSTER, 5=ELEC-
TRIC HEATING)
38:62 / 38:75 (depending
75
°C
on the mode selected)
1
-
(0=disabled, 1=enabled)
-
-
-
key again on the parameter to be
key for 3 seconds to confirm (a beep
key to exit
cod. 3540000400 - Rev. 03 - 09/2023
Carry out the same procedure for time slots 2 (d1b) to 6 (d1F), then
Level
repeat for the following days (d_2=Tuesday, d_3=Wednesday,
U / I
d_4=Thursday, d_5=Friday, d_6= Saturday, d_7=Sunday).
U / I
Once the programming has been set, it will be possible
U / I
to activate or deactivate it via parameter d_0 of the Sch.
U / I
The schedule can be more easily set via APP.
U / I
U / I
Note: between one time slot and the next, the appliance goes
U / I
into stand-by.
2.8.4 FAn MENU - FAN AND SILENT MODE SETTING
In this setting it is possible to activate the "silent mode" (for
example during the night) which allows a reduction in the noise
Level
of the appliance; in this condition the performance in terms of
water heating speed may be lower.
U / I
To set the fan speed parameter, access the "Fan" menu by
U / I
pressing the "SET"
U / I
U / I
Value
U / I
Enable silent mode function
U / I
F01
(0=disabled, 1=enabled)
F02 Fan speed in FAN mode
F03 Silent mode fan speed
Level: U=user menu - I=installer menu
To set the fan speed in FAN mode, select the F02 value. By
pressing the "SET"
speed will appear.
To enable the silent function, select the F01 value, pressing
the "SET"
the fan works in default conditions), to activate the silent mode
Level
press the "+" and " -" to bring the value to "1". Press the "SET"
U / I
key to confirm (a beep will confirm the modification) and
U / I
the "ON/OFF"
U / I
To set the fan speed in silent mode instead, select the F03
U / I
value. By pressing the "SET"
U / I
of the fan speed will appear. Decreasing the % value will de-
crease the noise.
U / I
U / I
U / I
-
EGEA TECH
key.
Unit of
Description
default min
measure
-
%
%
key again, the default value of the fan
key again the value "0" will appear (it means that
key to exit the menu.
key again, the default value
90 LT - 120 LT
max
Level
U / I
0
0
1
I
100 10
100
I
30
10
100
Publicidad
