ARDES AR5R09 Instrucciones Para El Uso página 25

light (G9) is off on the control panel and the unit work as a fan.
Mode Button (F):
Press this button when unit is on to select the desired mode: normal (the
indicator light G7 will turn on in the control panel), natural mode (the
indicator light G6 will turn on in the control panel) or sleeping mode (the
indicator light G5 will turn on in the control panel).
Using the aroma box (13)
Open the filter container by pulling it outwards.
Pour a few drops of aroma onto the filter, making sure that the liquid does
not drip (FIG. 8).
Close the filter container by reinserting it into its seat.
Attention: the perfumed aroma must not be a corrosive or flammable
substance.
Maintenance
GB
Before carrying out routine cleaning, switch off the fan and disconnect
mains power. For external cleaning use a soft and dry cloth.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
When you do not use it, after cleaning it, store the fan in a dry place
DAILY CLEANING
To reduce bacteria and scale residues, empty the water tank every day
after use and dry it with a soft and clean cloth.
Cleaning the cooling pad:
Remove air inlet grid (FIG. 9) and then the cooling pad. Clean the cooling
pad under the water and put it inside the unit.
Attache the grid (FIG. 10).
Attention: the cooling pad and the air inlet grid (10) must be replaced in
the appliance before turn it on.
Cleaning of the water tank:
Rotate the opening knob (6) to the horizontal position, partially extract the
25