Descargar Imprimir esta página

Panasonic ES727 Instrucciones De Operación página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

Before use
This Wet/Dry shaver can be used for
wet shaving with shaving lather or for
dry shaving. You can use this water-
tight shaver in the shower and clean
it in water. Treat yourself to wet lather
shaves for at least three weeks and
notice the difference. Your Panasonic
WET/DRY
shaver requires a little
time to get used to because your skin
and beard need about a month to
adjust to any new shaving method.
Charge the shaver for at least 8 hours
before using it for the first time or
when it has not been in use for more
than six months.
Parts identification
(see fig. 1)
Protective cap
Outer foil release buttons
Foil frame
Outer foil
Inner blade
Foil frame release button
On/Off switch
Switch lock button
Charge status lamp
Trimmer
Trimmer switch
Charging
adaptor with auto-
matic voltage adjustment
Wall mount
Wood screws
se
0090000000000
How to use the wall mount
The charging adaptor can be hung
on the wall using wood screws (in-
cluded).
1. Select an appropriate location on
the wall where the screws can go
in.
2. Attach the wall mount to the wall
as shown with the wood screws,
making sure that the arrow points
up.
3. Slide
the charging
adaptor
grooves into the wall mount until
it clicks in.
To remove the charging adaptor from
the „ig mount, slide the adaptor up-
ward.
Charging
(see fig. 2)
Place the charging adaptor upright
on a flat surface or mount it on a wall.
Ho the adaptor into an AC outlet,
it will adjust automatically to voltages
between 100-120 and 220-240V
AC.
In some areas, a special plug adap-
tor may be required.
Switch the shaver to the "0 « charge"
position and place it upright into the
charging adaptor with the switch fac-
ing toward the front.
The charge status lamp will glow red
when the shaver is placed on a right
charging position. It will flicker red
when the charging is completed.
You can fully charge the shaver in 1
hour if it seems to be losing speed.
A full charge will supply enough
power for about 7 shaves (three min-
utes per shave for a normal beard).
You can always store your shaver in
the charging adaptor to maintain full
power capacity. This shaver cannot
be overcharged.
Before traveling, charge it fully for 1
hour if you will not be taking the
charging adaptor with you.

Publicidad

loading