Mitsubishi DP-309 Manual página 5

comenct
[IS(B auto cancer compact pise
DIGITAL AUDIO
(PROGRAM) (EPEAT |
eee eee a ee ae ee ee <r
ae MITSUBISHt AUTO CHANGER COMPACT DISC PLAYER DP-309
1. Disc magazine slot
3. POWER button
Depress to turn on the player. The unit is in standby for an initial
one second until the internal power is stabilized.
4 5 6 7 89 10 11
5. FF b> / <4 FR buttons
6. PLAY button
7. STOP button
Press to stop playback.
8. NEXT button
Press once to select the next disc for playback. Press repeatedly to
select the desired disc as indicated on the display.
9. REPEAT button
10. PROGRAM button
When in STOP mode, press to enter program mode. The PRO-
GRAM indicator begins flashing. The disc and track number can be
entered for up to 30 programs using the 10 key pad.
11. PROGRAM-PLAY button
When in the STOP or PLAY mode. press to begin programmed
playback. The PROGRAM, DISC NO and TRACK NO indicator are
illuminated and the contents of program 74 are displayed.
Note: If the prgrammed disc number(s) is not in the magazine,
program play will not operate.
12. REMOTE SENSOR (DP-409R only)
Through this window the player receives infrared beam signals
from the remote commander. Do not block this window or the
remote commander function will not work.
13. CALL button
Press to check the contents of the program memory. The PRO-
GRAM, DISC NO and TRACK NO indicators are i/luminated and the
contents of the first program are displayed. Press once to check
the first program, press again for the second program and so forth.
When in the stop mode, the program memory display turns off
when pressed again after the last program has been displayed.
During playback, the program memory display turns off automa-
tically after 3 seconds.
14. CLEAR button
When in the STOP mode. press PROGRAM and then CLEAR to
erase the contents of the program memory.
15. Key pad
During programming these keys (1-0) are used to select the disc
and track number.
Note: Disc numbers greater than 5 and track numbers greater than
99 cannot be selected.
16. Display
@ DISC SET indicator
This indicator displays the location and number of the disc in the
magazine.
When a disc is loaded, the indicator for that disc number flashes.
@ DISC NO. indicator
During playback, this indicator displays the number of the current
disc. When programming, this indicator displays the disc number
selected.
@ TRACK NO. indicator