Publicidad
Idiomas disponibles
Idiomas disponibles
S tt
up your Fror
Door Refr erator
MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember,
a level Refrigerator
is necessary
for getting the doors perfectly even. If you need help, review the
previous section on leveling the Refrigerator.
When the left
door is lower
than the right
door.
When the left
door is higher
than the right
door.
1. Pull out the freezer drawer (1), then you can see the middle hinge (2).
2. Insert the supplied
hex wrench ( 3 ) into the shaft (4) of the middle hinge.
3. Please adjust the height by turning the hex wrench (3) clockwise
(
) or counter-clockwise
(
).
®
o,....
When you turn the hex wrench counter-clockwise(
), the door will move up.
1. After adjusting the doors, please insert the supplied fastener
( 5 ) using Pliers ( 6 ) in the gap between
the hinge-grommet
( 7 ) and the middle hinge ( 8 ). The number of fasteners you'll need to insert
depends
on the gap.
2 fastener are enclosed with the refrigerator.
The thickness
of each fastener
is 0.04".
16 sett]g up
Publicidad
