Publicidad
Idiomas disponibles
Idiomas disponibles
Electric-Tiller
Technical specifications
Model
Rated Voltage
Nominal Frequency
Nominal Consumption
Idle speed n
0
Working width
Working depth max.
Weight
Sound Pressure Level L
Sound power level L
WA
Vibration handle
Protection class: II; Protection system IPX4
Technical and visual changes can be made during the course of the further development and without prior notice. All
information given in these instructions for use are therefore given without guarantee. Legal claims, which are based
on the instructions for use can therefore not be made.
General safety information
WARNING: Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Safety instructions Electric-Tiller
Before operation
• The tool must be assembled correctly before
use.
• The tool should be checked carefully before
use. You should only work with a tool that is in
good condition. If you notice any defect on the
tool that may cause a hazard to the operator,
do not operate the tool until such defects have
been rectified.
• Replace worn or damaged parts for reasons
of safety. Use only original spare parts. Parts
not produced by the original manufacturer may
have a poor fit and possibly cause injury.
• Before use, all foreign bodies must be re-
moved from the working area, also pay atten-
tion to foreign bodies during operation.
GB | Operating Instructions
pA
IEM 800 S
V~
230
Hz
50
W
800
min
380
-1
mm
300
mm
200
kg
8,1
dB (A)
75,5
dB (A)
93
m/s
≤2,5
2
• Only work in daylight or sufficiently good arti-
ficial light.
• Wear eye protection and face or dust mask if
operating in dusty conditions.
• Dress properly. When operating the tool, pay
attention to the following notes concerning
your working clothes:
- The use of protective gloves and rugged
footwear is recommended.
- Wear a proper hat or other headgear to
contain long hair.
- Avoid wearing loose clothing or jewellery
that might get caught in the rotating tines.
Proper use
The user is responsible for third parties
while working with the tool.
• People not acquainted with the operating in-
structions, children, juveniles who have not yet
reached the minimum age for using this tool,
and people under the influence of alcohol,
drugs or medication are not allowed to use the
tool.
• Only use the tool for its intended purposes.
• Keep children and pets away. All onlookers
should be kept at a safe distance from the tool
when it is operated.
GB-2
[K=3,0 dB(A)]
[K=1,5 m/s
]
2
Publicidad
